Do’s & Don’ts of Load Cell Operations

 

What comes after you have bought a load cell and installed it into a specific application? It’s the regular usage and how you utilize the force transducer that decides whether there will be optimal results or not. When working with a load cell you cannot compromise on the functioning part as that interferes with the results in terms of precision and accuracy. The moral of the story is if your usage is flawed than even buying a top-quality compression load cell from the best load cell suppliers in Ahmedabad will hardly deliver the desired results. On that note, here is a blog that will define the dos and don’ts of load cell operations, so that you get accurate results every time along with the longevity of the transducer and the application.

 

Understanding the Basic Dos & Don’ts of Load Cells

Following these basic rules of using a load cell be it an s-type or shear beam load cell, will benefit you in the following ways:

 

• Reduced maintenance expenses;
• Lesser instances of repair and recurring costs. 
• Reduced risk of downtime and recurring expenses;

 

What you should do?

• Select the right load cell that is appropriate for your application considering the measuring features, the ambience or environment in which it would be used, along with other aspects of precision. 
• Ensure when buying and calibrating that the maximum and minimum capacities of the force transducer are compatible with your application, or else it can lead to overloading issues. 
• Make sure that the load cell is compatible with the environment in which the application will be installed. For instance, if it is a rainy environment then go for rust and corrosion-free load cell for better performance and longevity. 
• Remember that the right amount of power usage and supply will help you prevent short circuits and surges. Consult with the load cell supplier regarding this if you want. 
• Make sure that you check the calibration certificate of the load cell along with the datasheet offered by the supplier. It will help you measure the capacity, power supply, precision level, etc. of the load and apply the same when using it. 
• The alignment of the load cell corresponding to the application should be proper for optimum precision levels of the force and tension readings. 
• Keep in mind that too much exertion, tightening, and tension can cause damage to the load cell, interfering with the results’ accuracy.

What you should not do while using a load cell?

• You must not use a load cell with a lower IP rating, than what is required in the environment of your application. Refrain from pulling or moving the s-type load cell or any other variety, using the cable that it is attached with. 
• You should never operate the load cell beyond its capacity that will have dire consequences on the transducer and also the application.
  

Conclusion  

On a concluding note, if you are looking for a company or supplier to source superior quality load cells, then check out the offerings of Sensomatic Load Cell. It is one of the leading with a robust network across major cities in India. Sensomatic has a wide variety of force transducers in its inventory that are available at affordable prices. With a decade's old legacy, the company lives up to its reputation as the load cell market leader.